Product Overview
- Outdoor AP
AP-xx68
AP-xx61
AP-xx10 - Indoor AP
APRT-2801GS - Hotspot Enterprise
M-Type (Outdoor)
M-Type (Indoor)
ADSL2+ DSLAM
Access Controller - Industrial
AP-1001G
AP-2001G - Solution
Fixed Wireless
Hotspots - Accessories
1.7 GHz Antenna
2.4 GHz Antennas
5.0 GHz Antennas
Lightning Arrestor & Power Over Ethernet (POE)
Radio Frequency Low Loss Cable -
Download Catalogue
1. Products
2. Accessories
M-Type (Outdoor)
Hotspot & enterprise Multiple SSID
Access Point
Hotspot & enterprise Multiple SSID
Access Point
RFNet's outdoor M-Type is a new line of products, which is designed to address the needs for hotspot operators
to increase the efficiency of the network infrastructure, by providing access to different networks through a single access point.
Supporting 4 SSID's, the RFNet's M-Type products can be set to serve up to 4 networks and each with independent 802.1Q VLAN tagging. It is compliant with IEEE802.11g standard with data rate of up to 54 Mbps, and adjustable Transmit Power for wireless cell sizing.
Its IP-standard rugged outdoor housing is both water and dust resistant. Configurable as Access Point or Wireless Bridge, it is designed for mobile users and ideal for deployment in places such as conference and convention halls, as well as beach resorts where wireless connectivity is needed.
Data encryption such as WEP, WPA-PSK and WPA/WPA2 provides the necessary security and makes interoperability with other equipments possible. Enhanced access control can be made with the use of MAC address filtering. The firmware is upgradeable through web-server and Telnet console, and with intelligent wireless networking and easy product configuration features either by web-based or through Telnet. This is one of the most cost-effective solution for the hospitality market.
Common Product Features
Key Features AP-1010M
Key Features AP-1061M
Available Models
Download Catalogue
Supporting 4 SSID's, the RFNet's M-Type products can be set to serve up to 4 networks and each with independent 802.1Q VLAN tagging. It is compliant with IEEE802.11g standard with data rate of up to 54 Mbps, and adjustable Transmit Power for wireless cell sizing.
Its IP-standard rugged outdoor housing is both water and dust resistant. Configurable as Access Point or Wireless Bridge, it is designed for mobile users and ideal for deployment in places such as conference and convention halls, as well as beach resorts where wireless connectivity is needed.
Data encryption such as WEP, WPA-PSK and WPA/WPA2 provides the necessary security and makes interoperability with other equipments possible. Enhanced access control can be made with the use of MAC address filtering. The firmware is upgradeable through web-server and Telnet console, and with intelligent wireless networking and easy product configuration features either by web-based or through Telnet. This is one of the most cost-effective solution for the hospitality market.
Common Product Features
- Support up to four distinct SSID
- Each SSID comes with independent 802.1Q VLAN tagging
- Web-based, telnet and SNMP management
- WPA1, WPA2 and WPA-PSK (In AP mode)
- Power Over Ethernet DC Powered
- Wireless Isolation between wireless clients
- Support seamless roaming between AP within same subnet
- Support static WLAN WEP up to 152 bits encryption
- IP address discovery software (Viper Quick Start)
- Firmware upgradeable through web-server and/or telnet
Key Features AP-1010M
- Industrial grade IP65 Housing
- Integrated with 14dBi directional antenna
- Integrated with 12m of RJ45 cable
Key Features AP-1061M
- Industrial grade IP67 Casing
- Support external antenna only
- Water tight Ethernet port with matching connect on cable end
Available Models
Download Catalogue